MPS-0909A9-82 Page 1 925 to 960 Low Noise Receiver Amplifier

pages: 1 - 2

MPS-0909A9-82

925 to 960 MHz Low Noise Receiver Amplifier

MPS-0908A9-82 Product Photo

Features:

Very Low Noise 1.1 dB Typ.	6.0 Volt Bias
High +36 dBm Typ. IP3	26% High Power Added Efficiency
16.0 dB Typical Gain

The MPS-0909A9-82 is a low noise, high dynamic range amplifier designed for PDC receiver applications. The circuit is matched to 50 ohm and employs a single stage GaAs FET with internal matching to provide an exceptional noise figure, 1.1 dB, combined with an extremely high IP3, +36 dBm. Typical applications are cellular base station receivers, Tower mounted LNA's, smart antenna systems, picocell repeaters and receiver multi-couplers.

	Specifications
	Electrical at 25°C, Vdd = 6.0 V, Zo = 50 ohms

SYMBOL	PARAMETERS	Min	Typical	Max	Unit
Freq.	Frequency Range	925		960	MHz
SSG	Small Signal Gain	14	16		dB
P1 dB	P out at 1 dB Compression Point		+22.0		dBm
IP3	Third-Order Intercept	+33.0	+36.0		dBm
NF	Noise Figure		1.1	1.5	dB
VSWR	Input/Output VSWR		2.0:1	2.5:1
GOF	Gain Variation over Frequency		ą 0.20	ą0.50	dB
GOT	Gain Variation over Temperature		ą0.15		dB/°C
Idd	DC Current		180	250	mA
PAE	Power Added Efficiency		26		%

0909A9_82_1.gif (2246 bytes)

0909A9_82_2.gif (2368 bytes)

Absolute Maximum Ratings

Maximum Bias Voltage	7.0 V
Maximum continuous RF Input Power	240 mW
Maximum Peak Input Power	360 mW
Maximum Case Operating Temperature	+ 85 °C
Maximum Storage Temperature	- 65 °C to + 150 °C

back to catalog page

pages: 1 - 2